LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2002 >> Rodeo S, 2.2 D, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System (Y22SE 2.2L) >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

  1. Install crankshaft angle sensor into the cylinder block.

    Before installation, apply small amount of engine oil to the O-ring.

    1. Torque:  6 N.m (52 lb in)
  2. Reconnect wiring connector to crankshaft angle sensor.
scientia non olet · About LEMON Manuals