Parts Location: Installation

To install, follow the removal steps in reverse order noting the following points:

1. Tight the front bumper back bar assembly fixing bolts to the specified torque.

   Torque:  147 N.m (108 lb ft)

   See Figure under TORQUE SPECIFICATIONS.

2. Front bumper adjustment.
   • When the bolts fixing front bumper assembly are tightened, adjustment should be made between the back bar and front side bumper so that there is a clearance of 3 mm (0.12 in) between the top of the bumper and the fender. The angled portion of the bumper must be flush with the fender.
     Fig 1: Identifying Adjustment Front Bumper

     Courtesy of ISUZU MOTOR CO.