Conditions For Setting The DTC

This DTC will set if any of the following conditions occurs:

Condition 1 ("R" bad position): 

• Engine is running.
• No output speed DTC P0722, P0723.
• Output speed greater then 3,200 RPM.
• Range switch indicates "R".
• All conditions met for 4 seconds.

Condition 2 ("P" or "N" bad position): 

• Engine is running.
• No TPS codes.
• Engine speed is less than 3,000 RPM.
• TP angle is greater than 20%.
• Range switch indicates "P" or "N".
• All conditions met for 4 seconds.