LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2001 >> Rodeo LS, 3.2 W, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Starters - 2.2L) >> On-Vehicle Testing >> Circuit Test

Circuit Test

WARNING: This page is about a different variant/trim than selected.

If a no-start condition exists, ensure battery is fully charged. Touch test light to starter solenoid Black/White wire terminal. Put gear selector in Park (A/T) or Neutral (M/T). On M/T, fully depress clutch pedal. On all models, turn ignition switch to START position. If test light does not glow, check ignition switch, starter relay, clutch switch/inhibit switch and circuit wiring. If test light glows, check battery cable connections. If connections are okay, starter or solenoid is defective.