LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2001 >> Rodeo LS, 3.2 W, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - Self-Diagnostics - 2.2L) >> Programming >> EEPROM Programming Procedure

EEPROM Programming Procedure

WARNING: This page is about a different variant/trim than selected.

Connect scan tool and retrieve information from PCM. Turn ignition off. Ensure battery is fully charged. Download latest program and calibration from ITCS. Turn ignition on. Reconnect scan tool and program PCM. Start engine and allow to run for at least one minute. Check for DTCs. If PCM does not program, check all PCM connections and retry. If PCM still can not be reprogrammed, replace PCM.

scientia non olet · About LEMON Manuals