LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2001 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> Transmission >> Transfer Case Overhaul >> Removal & Installation >> Transfer Case >> Removal

Transfer Case: Removal

  1. Disconnect negative battery cable. Drain transfer case fluid. Remove skid plate. Place reference marks on drive shafts and companion flanges for installation reference.
  2. Remove drive shafts. Disconnect 4 oxygen sensor harness connectors from transmission harness. Remove both right and left-side catalytic converters.
  3. Remove transfer case gearshift lever knob. Remove front console and disconnect necessary harness connectors. Disconnect shift lock cable and shift control rod. Remove gearshift lever assembly.
  4. Disconnect transfer case control lever. Disconnect 4WD switch connector, speed sensor harness connectors and 2WD-4WD harness connector from transmission harness. Using transmission jack, support transfer case. Remove transfer case-to-transmission bolts and nuts. Lower transfer case from vehicle.
scientia non olet · About LEMON Manuals