Air Bag Deployment: Notes
WARNING: This page is about a different car, the 2001 Isuzu VehiCROSS. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Air bag assemblies will be very hot after deployment. Wait 30 minutes after deployment before touching assemblies.
Never connect deployment wires to any voltage source before connecting to air bag assembly leads. Air bag will immediately deploy when a voltage source is connected to it.
Ensure that air bag assemblies are securely mounted to vehicle, deployment fixture or tire prior to deployment. Otherwise, severe personal injury could result from deployment.
Never connect deployment wires to any voltage source before connecting to air bag assembly leads. Air bag will immediately deploy when a voltage source is connected to it.
Ensure that air bag assemblies are securely mounted to vehicle, deployment fixture or tire prior to deployment. Otherwise, severe personal injury could result from deployment.
NOTE:
If vehicle is to be scrapped, perform on-vehicle air bag deployment procedure.