LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1999 >> Trooper Part Time >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Diagnostic Tests >> DTC 24: Transfer Monitor

DTC 24: Transfer Monitor

  1. Turn ignition OFF. Disconnect EHCU harness connector. Check terminal No. 9 (Pink wire) at EHCU harness connector for damage or poor connection. Repair as necessary. After repairs, go to step  3 . If circuit is okay, go to next step.
  2. Check Torque On Demand (TOD) ECU or 4WD controller for proper operation. Repair as necessary. If no problem is found, replace EHCU. After repairs, go to next step.
  3. Reconnect all components. Ensure all components are properly installed. Clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES  under DIAGNOSIS & TESTING. Verify system operation. See SYSTEM OPERATION CHECK  under TROUBLE SHOOTING.
scientia non olet · About LEMON Manuals