LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Trooper LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (A/C-Heater System) >> Testing >> Relays >> 5-Pin Relay

5-Pin Relay

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1999 Isuzu Rodeo, 1999 Isuzu Amigo, 1999 Honda Passport, 1998 Isuzu Rodeo, and 1998 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove relay from engine compartment fuse/relay block. Check continuity between terminals No. 3 and 5. See Fig 1 . Continuity should exist. Check continuity between terminals No. 1 and 5. Continuity should not exist.
  2. Apply battery voltage between terminals No. 2 and 4. Ensure continuity does not exist between terminals No. 3 and 5 with voltage applied. Continuity should exist between terminals No. 1 and 5 with voltage applied. Replace relay if continuity is not as specified.
Fig 1: Identifying 5-Pin Relay Connector Terminals
G95A60889Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals