LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Rodeo S, 2.2 D >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Meter Body >> Removal & Installation (4.3L)

Removal & Installation (4.3L)

  1. Disconnect negative battery cable. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE . Remove electrical connector at fuel meter body. Remove fuel feed and return hoses. Remove upper manifold assembly. See UPPER INTAKE MANIFOLD .
  2. Squeeze poppet nozzle while pulling out of socket. Remove attaching bolts. Remove fuel meter body from bracket by releasing lock tabs on bracket.
  3. To install, reverse removal procedure. Fuel meter assemblies are numbered to indicate poppet nozzle order. Ensure poppet nozzles are firmly seated. Install NEW "O" rings on fuel feed and return lines. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals