DTC 14: Abnormal EHCU Function
- Turn ignition off. Disconnect EHCU harness connectors. Inspect EHCU ground circuit and repair as necessary. Using DVOM, check for continuity between ground and EHCU 16-pin harness connector terminal No. 7 and ECHU 2-pin harness connector terminal No. 2 (Black wires). If continuity is present, go to next step. If continuity is not present, repair body ground harness.
- Turn ignition off. Reconnect EHCU harness connector. Clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTICS. Turn ignition on. Perform system self-check. See ANTI-LOCK SYSTEM SELF-CHECK under DIAGNOSIS & TESTING. If ABS warning light remains illuminated, retrieve DTCs. If DTC 14 returns, replace EHCU. If any DTC other than DTC 14 is present, perform appropriate diagnostic test.