LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1997 >> Rodeo S, 2.6 E >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls - Remove/Install/Overhaul - 3.2L) >> Fuel System >> Lower Intake Manifold >> Removal & Installation

Removal & Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative battery cable. Remove fuel rail and spacers that are located where fuel rail through-bolts enter manifold.
  2. Remove lower intake manifold nuts and through-bolts. Remove lower intake manifold from engine, and cover intake openings.
  3. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals