System Description

WARNING: This page is about a different variant/trim than selected.

The PCM monitors engine operation. It also contains a self-diagnostic system which stores Diagnostic Trouble Codes (DTCs) and compares them to On-Board Diagnostics Generation II (OBD-II) standards.

The goal of OBD-II regulation is to provide vehicle with an on-board diagnostic system which is capable of continuously monitoring the efficiency of emission control systems, and to improve diagnosis and repair when system failures occur.

The Federal Test Procedure (FTP) sets maximum allowable emission standards. A Malfunction Indicator Light (MIL) must illuminate if a system or component either fails or deteriorates to a point where the vehicles emissions could rise above 1 1/2 times FTP standards.

DTCs may only be retrieved using an On-Board Diagnostic (OBD-II) scan tester.