LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1997 >> Rodeo S, 2.6 E >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Starter - 3.2L) >> On-Vehicle Testing >> Ignition Switch Test

Ignition Switch Test

WARNING: This page is about a different variant/trim than selected.

If ignition switch is suspected of being faulty, disconnect harness connector from switch. Using an ohmmeter, check for continuity between specified switch terminals. See Fig 1 . If continuity is not as specified, replace ignition switch.

Fig 1: Testing Ignition Switch
G94F46446Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals