LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1997 >> Rodeo S, 2.6 E >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Starter - 3.2L) >> Bench Testing >> No-Load Test

No-Load Test

WARNING: This page is about a different variant/trim than selected.

Fix starter on test bench as indicated. See Fig 1 . Close switch, measure and record current, voltage and speed of starter. See STARTER SPECIFICATIONS  for proper operating specifications.

Fig 1: No-Load Bench Test Set-Up
G96A06653Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals