LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1997 >> Rodeo S, 2.6 E >> Repair and Diagnosis >> Body & Frame >> Power Windows >> System Tests >> Power Window Circuit Test >> Right Front

Right Front

  1. Turn ignition off. Remove right front power window switch from door trim panel. Disconnect power window switch harness connector "A". Turn ignition on. Using a voltmeter, check voltage between terminal No. 9 (Green/Red wire) of harness connector "A" and ground. See Figure . Battery voltage should be present.
  2. Turn ignition off. Using an ohmmeter, check for continuity between terminals No. 6 (Blue/Red wire) and No. 10 (Brown/White wire) at harness connector "A". Continuity should be present. Check for continuity between ground and terminal No. 5 (Black wire) at harness connector "A". Continuity should be present.
scientia non olet · About LEMON Manuals