LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1997 >> Rodeo S, 2.6 E >> Repair and Diagnosis >> Body & Frame >> Power Windows >> System Tests >> Power Window Circuit Test >> Left Rear

Left Rear

  1. Turn ignition off. Remove left rear power window switch from door trim panel. Disconnect power window switch harness connector. Turn ignition on. Using a voltmeter, check voltage between terminal No. 4 (Green/Red wire) of harness connector and ground. See Figure . Battery voltage should be present.
  2. Turn ignition off. Using an ohmmeter, check for continuity between terminals No. 5 (Blue/Red wire) and No. 6 (Brown/White wire) at harness connector. Continuity should be present. Check for continuity between ground and terminal No. 3 (Black wire) at harness connector. Continuity should be present.
scientia non olet · About LEMON Manuals