LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1996 >> Trooper S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Servicing - A/T) >> Adjustments >> Shift Interlock Cable

Shift Interlock Cable

WARNING: This page is about a different variant/trim than selected.

Place gear selector lever in "P" position. Loosen both gear selector lever nuts (located under console, at right front side of gear selector lever. Hand tighten front nut against lever boss while pulling cable screw cap toward front of vehicle. Back off front nut 2 turns. Tighten rear nut against lever boss. Ensure gear selector lever cannot be moved from "P" position with ignition switch in LOCK position.

scientia non olet · About LEMON Manuals