LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1996 >> Trooper S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - System/Component Tests) >> Emission Systems & Sub-Systems >> A/C Clutch Control >> A/C Clutch Relay

A/C Clutch Relay

WARNING: This page is about a different car, the 1996 Acura SLX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect A/C clutch relay harness connector. Using proper mini-schematic and an ohmmeter, check continuity between A/C clutch relay winding terminals. See WIRING DIAGRAMS  section. Continuity should exist. Check continuity between clutch drive circuit terminals of relay. Continuity should not exist.
  2. Using jumper wires, apply ground and battery voltage to relay winding. Continuity should now exist between clutch drive circuit terminals of relay. Replace A/C clutch relay if continuity does not exist.
    A/C COMPRESSOR CLUTCH RELAY LOCATION

    Application Location
    SLX In Under-Hood Fuse/Relay Box
scientia non olet · About LEMON Manuals