LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1996 >> Trooper S, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Accelerator Cable >> Adjusting Cable At Throttle Body

Adjusting Cable At Throttle Body

  1. Loosen adjusting and jam nut. Pull on cable while fully closing throttle valve. Tighten adjusting and jam nut.
  2. Loosen adjusting nut by 3 turns and tighten jam nut again. Valve lever must return up to stopper screw. If valve lever does not reach stopper screw, repeat adjustment procedure.
scientia non olet · About LEMON Manuals