Clearing Codes
WARNING: This page is about a different car, the 1996 Acura SLX. However, it is still accessible from the selected car via links, so may be relevant.
- After repairs are performed, clear PCM memory of all stored codes. Ensure ignition is off. To clear codes, use diagnostic scan tool "clear DTCs" or "clear info" function. Follow instructions supplied by tool manufacturer, when clearing DTCs.
- Trouble codes can also be cleared by disconnecting any PCM power source or negative battery cable for at least 30 seconds. However, if disconnecting battery remember that other memory functions (clock, radio, etc.) will need to be reset.