LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1996 >> Trooper LS, Standard >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 8 (Engine Controls - Basic Testing) >> Fuel System >> Fuel Pump Relay Test

Fuel Pump Relay Test

WARNING: This page is about a different car, the 1996 Acura SLX. However, it is still accessible from the selected car via links, so may be relevant.
  1. PCM supplies power to relay as long as PCM receives ignition reference signals or starter crank signal. To run fuel pump without starting engine, remove relay and jumper terminals No. 2 and 4.
  2. To test relay, use jumper wires to ground terminal No. 3 of relay and apply battery voltage to terminal No. 1 of relay. Using ohmmeter, check for continuity between relay terminals No. 2 and 4. If continuity does not exist, replace relay.
scientia non olet · About LEMON Manuals