LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1996 >> Trooper LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> A/C Clutch Control >> A/C Clutch Relay

A/C Clutch Relay

  1. Disconnect A/C clutch relay harness connector. Using proper mini-schematic and an ohmmeter, check continuity between A/C clutch relay winding terminals. See WIRING DIAGRAMS  section. Continuity should exist. Check continuity between clutch drive circuit terminals of relay. Continuity should not exist.
  2. Using jumper wires, apply ground and battery voltage to relay winding. Continuity should now exist between clutch drive circuit terminals of relay. Replace A/C clutch relay if continuity does not exist.
A/C COMPRESSOR CLUTCH RELAY LOCATION

Application Location
Trooper In Under-Hood Fuse/Relay Box
scientia non olet · About LEMON Manuals