LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1995 >> Trooper LS, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Circuit Testing >> Power Window Circuit >> Right & Left Rear

Right & Left Rear

  1. Turn ignition off. Remove right or left rear power window switch from door trim panel. Disconnect power window switch harness connector. Turn ignition on. Using a voltmeter, check voltage between harness connector terminal No. 2 (Red/Yellow wire) and ground, then terminal No. 4 (Blue/Black wire) and ground. SeeFig 1 . Battery voltage should be present at each terminal.
  2. Turn ignition off. Using an ohmmeter, check for continuity between harness connector terminal No. 3 (Black wire) and ground. Continuity should be present. Check for continuity between harness connector terminals No. 5 (Blue/Red wire) and No. 6 (Brown/Red wire). Continuity should be present.
Fig 1: Right/Left Rear Power Window Switch Harness Connector Terminals
G96J07614Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals