LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1995 >> Rodeo S, 3.2 V, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 2.6L >> Emission Systems & Sub-Systems >> Air Injection >> Air Management Valve

Air Management Valve

  1. Warm engine to normal operating temperature. With engine idling, ensure secondary air is passing from silencer on air management valve. See Figure .
  2. Stop engine. Disconnect air hose at check valve. Plug opening of check valve. Start engine and note air passage from air management valve. After a few seconds, air should pass from silencer. Replace air management valve if defective. Air management valve will operate only under specified conditions. See Figure .
scientia non olet · About LEMON Manuals