LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1995 >> Rodeo LS, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Gear Selector Lever & Control Rod

Gear Selector Lever & Control Rod

  1. Ensure jam nuts on selector control rod are loose. Place selector lever in "N" position. Push selector lever forward against Neutral detent. Hold selector lever in this position.
  2. Turn control rod forward jam nut until it comes in contact with boss. Tighten rear nut against selector lever boss. Install locking clip and tighten nut. Ensure gear selector operation is correct.
scientia non olet · About LEMON Manuals