LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1995 >> Rodeo LS, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Clutches) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 1996 Isuzu Trooper, 1996 Acura SLX, and 1995 Isuzu Trooper. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Center Bearing Retainer Bolts 45 (60)
Center Crossmember Bolt (2WD) 37 (50)
Drive Shaft Flange Bolt 46 (62)
Exhaust-To-Manifold 49 (66)
Exhaust Flange Bolt 32 (43)
Flywheel-To-Crankshaft Bolt (1) 40-47 (54-64)
Front Crossmember Bolt (4WD) 58 (79)
Master Cylinder Fluid Line Nut 14 (20)
Master Cylinder Mounting Bolt 12-16 (16-22)
Pressure Plate-To-Flywheel Bolt (2) 12-20 (16-27)
Rear Transmission Mount Bolt 30 (41)
Rear Transmission Mount Nuts 37 (50)
Release Cylinder Fluid Line
Into Damper Cylinder 12 (16)
Out Of Damper Cylinder 14 (20)
To Oil Line Pipe Nut 12-16 (16-22)
Oil Pipe Line-To-Release Cylinder
2.6L 25 (34)
4.3L 14 (20)
Release Cylinder Mounting Bolt 32 (43)
Release Lever Ball Stud Nut 29 (39)
Release Lever Bridge Bolt 28 (38)
Shift Lever Cover Bolt 14 (20)
Skid Plate Bolt 27 (37)
Starter Bolt 30 (41)
Transmission-To-Engine Bolt 56 (76)
INCH Lbs. (N.m) 
Clutch Dust Cover 52 (6)
(1) Install NEW bolts and apply Loctite (262) to bolt threads. Tighten bolts in a diagonal pattern.
(2) Tighten bolts in a diagonal pattern.