LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Rodeo LS, RWD >> Repair and Diagnosis >> Body & Frame >> Door Locks - Power >> Component Testing >> Lock Actuator

Lock Actuator

NOTE: Before testing door lock actuators, ensure lock rods are properly connected and mechanisms operate freely.
  1. Disconnect the door lock actuator connector. Apply battery voltage to the actuator terminal No. 3 and ground terminal No. 1. SeeFig 1 . Door should lock. Apply battery voltage to terminal No. 1 and ground terminal No. 3. Door should unlock.
  2. If doors lock and unlock as described, actuators are okay. If doors do not lock and unlock as described, replace actuator as necessary.
Fig 1: Door Lock Actuator Terminal ID (Rodeo)
G93A83493Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals