LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Rodeo LS, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Component Testing >> Front Wiper Motor

Front Wiper Motor

  1. To check low speed operation, connect positive battery terminal to terminal No. 2 and negative battery terminal to terminal No. 3 of wiper motor connector. SeeFig 1 . Wiper motor should operate at low speed.
  2. To check high speed operation, connect positive battery terminal to terminal No. 1 and negative battery terminal to terminal No. 3 of wiper motor connector. SeeFig 1 . Wiper motor should operate at high speed.
  3. To check auto stop operation, operate wiper motor at low speed. See step 1). Disconnect positive battery terminal from terminal No. 2. Connect battery positive terminal to wiper motor terminal No. 6. Connect a jumper wire between terminals No. 2 and 5. Wiper motor should operate at low speed then stop at auto stop position.
Fig 1: Wiper Motor Or Intermittent Relay Conn. Terminal ID (Rodeo)
G94F46735Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals