LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Rodeo LS, 4WD, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Steering Column >> Removal

Steering Column: Removal

  1. Disconnect negative battery cable. Remove horn pad and steering wheel. See STEERING WHEEL & HORN PAD. Remove steering column shrouds and lower instrument panel trim panel. See Figure . Disconnect all column switches' wiring connectors and remove tie-straps retaining harnesses to column. Remove combination switch retaining screws, and slide switch from shaft.
  2. Remove snap ring and bushing. Remove ignition switch/column lock assembly retaining bolts, and slide switch from shaft. In engine compartment, make reassembly alignment marks on universal joint/coupler and steering gear unit shaft. See Figure . Remove universal joint/coupler clamp bolt.
  3. Remove lower column bracket bolts. Remove upper column bracket bolts. See Figure . Separate universal joint/coupler from steering gear unit shaft. Remove steering column.
scientia non olet · About LEMON Manuals