LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Rodeo LS, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 3.2L EFI >> Engine Sensors & Switches >> Coolant Temperature Sensor

Coolant Temperature Sensor

NOTE: Coolant temperature sensor malfunctions may set Code 14 or 15. For more information, see TESTS W/CODES - 3.2L EFI article.
  1. Unplug coolant temperature sensor. Sensor is located on rear of engine, in coolant transfer tube Sensor connector contains Gray and Gray/Black wires.
  2. Check resistance between sensor terminals at specified temperature. See COOLANT TEMPERATURE SENSOR RESISTANCE SPECIFICATIONS table. Replace sensor if it is not within specification.
COOLANT TEMPERATURE SENSOR RESISTANCE SPECIFICATIONS

Temperature °F (°C) Ohms
-40 (-40) 100,700
0 (-18) 25,000
20 (-7) 13,500
40 (4) 7500
70 (21) 3400
100 (38) 1800
160 (71) 450
210 (99) 185