LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1993 >> Trooper RS, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> System Testing >> Fuel Gauge Sending Unit

Fuel Gauge Sending Unit

  1. Install fuel gauge sending unit on test bench. Connect ohmmeter to fuel gauge sending unit at terminals No. 1 and No. 2. SeeFig 1 .
    Fig 1: Measuring Fuel Gauge Sending Unit Resistance
    G93I01616Courtesy of ISUZU MOTOR CO.
  2. As float is moved, resistance reading should change smoothly. See FUEL GAUGE SENDING UNIT RESISTANCE  . Connect ohmmeter to fuel gauge sending unit at terminals No. 1 and 4. Resistance should be 13.6 ohms. If resistance readings are not as specified, replace sending unit.
FUEL GAUGE SENDING UNIT RESISTANCE

Sending Unit Position Ohms
Empty 115-125
1/2 43.5-46.5
Full 16.2-17.8
scientia non olet · About LEMON Manuals