Power Window Motor Circuit (Driver's Side Switch)

Remove driver's door trim panel and remove power window switch assembly. Disconnect driver's side power window switch connector for appropriate power window. Apply battery voltage to specified connector terminal and ground specified connector terminal. See POWER WINDOW MOTOR CIRCUIT TEST (DRIVER'S SIDE SWITCH) . For connector terminal locations, seeFigure .
Power window should operate unless it is already at maximum travel. Reverse test leads. Power window should operate in opposite direction. If power windows operate as specified, wiring circuits are okay. If power windows do not operate as specified, repair appropriate circuit as necessary. If circuit is okay, check appropriate power window motor and replace as necessary. Refer to POWER WINDOW MOTOR TEST under TESTING.

POWER WINDOW MOTOR CIRCUIT TEST (DRIVER'S SIDE SWITCH)