LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1993 >> Stylus Standard >> Repair and Diagnosis >> Electrical >> Starter >> Testing >> Solenoid Tests >> Solenoid Return Test

Solenoid Return Test

  1. Connect negative battery lead to terminal "C" and ground. See Fig 1 or Fig 2 . Connect battery positive lead to terminal "M". Pinion should flutter.
  2. Disconnect lead at terminal "C". Pinion should immediately return to stationary position. If pinion does not return to stationary position, replace solenoid.
Fig 1: Testing Solenoid Pull-In Coil (A/T)
G91C02024Courtesy of ISUZU MOTOR CO.
Fig 2: Testing Solenoid Coil (1.6L M/T)
G91F02025Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals