LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1993 >> Stylus Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Component Testing >> Temperature Gauge

Temperature Gauge

  1. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Ensure all instrument cluster electrical connections are disconnected. Connect ohmmeter leads between temperature gauge IGN and UNIT terminals. SeeFig 1 .
    Fig 1: Testing Temperature Gauge
    G91I02079Courtesy of ISUZU MOTOR CO.
  2. Resistance should be 60 ohms. Connect ohmmeter leads between temperature gauge UNIT and GND terminals. Resistance should be about 206 ohms. If readings are not as specified, replace temperature gauge.
scientia non olet · About LEMON Manuals