LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1992 >> Trooper LS, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor (2.3L) >> Installation

Distributor (2.3L): Installation

  1. Remove valve cover. Bring No. 4 cylinder to TDC of compression stroke. Align camshaft pulley set mark with front plate set mark.
  2. Apply engine oil to distributor o-ring. Align distributor case set mark with distributor shaft set mark. See Figure. Install distributor into cylinder head.
  3. Align distributor shaft set mark with cylinder head set mark. See Figure. Install valve cover.
  4. Install and tighten distributor-to-cylinder head bolt to specification. See TORQUE SPECIFICATIONS .
  5. Connect high tension wires and distributor harness connector. Set ignition timing. See appropriate SPECIFICATIONS article in ENGINE PERFORMANCE section.
scientia non olet · About LEMON Manuals