LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1992 >> Rodeo XS, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.6L >> Code Charts >> Code 63 - Vehicle Speed Sensor Signal >> Sensor & Equipment

Sensor & Equipment

  1. Connect a circuit tester between the control unit harness connector terminal 41 and ground.
  2. Disconnect speedometer cable at transmission end and turn the inner cable slowly.
  3. If the tester indicates continuity and open circuit condition alternately as the cable is turned, the car speed sensor and circuit are operating normally
scientia non olet · About LEMON Manuals