LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1992 >> Impulse RS >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Lubrication >> Hydraulic System Bleeding

Hydraulic System Bleeding

  1. Fill fluid reservoir. With engine running, turn steering wheel fully left and turn engine off. Fill fluid reservoir to MIN mark. Start engine and idle for 30 seconds. Stop engine. Fluid should still be at MIN mark. Add fluid if necessary.
  2. To bleed system, turn steering wheel from full left to full right, 3 or 4 times, without hitting locks. System is free of air when there is no buzz in hydraulic line. Add fluid if necessary. If buzz continues and pump is not low of fluid, pump is damaged internally. Replace as required.
scientia non olet · About LEMON Manuals