LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1989 >> I-Mark RS, 2D Hatchback >> Repair and Diagnosis >> Engine Performance >> System >> System/Component Tests - EFI >> Fuel System >> Fuel Control >> Dropping Resistors

Dropping Resistors

  1. Unplug dropping resistor wire connector. Resistor is located on firewall in engine compartment.
  2. Measure resistance between center terminal of resistor connector and other terminals. Standard resistance at all terminals should be 5-7 ohms at room temperature. If any measurment deviates from standard value, replace dropping resistor.
scientia non olet · About LEMON Manuals