LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1987 >> Impulse RS, Standard, MSG5K >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Evaporation System >> Component Testing >> Tank Pressure Control Valve >> I-Mark

Tank Pressure Control Valve: I-Mark

  1. Remove hoses and remove valve. Apply 1.1-1.2 in. Hg to intake manifold vacuum port and blow air into fuel tank port. Valve should open and allow air to pass through canister port.
  2. Remove vacuum and blow through fuel tank port with canister port blocked. Air should pass through vacuum port. If valve does not perform as outlined, replace valve.
Fig 1: Testing Tank Pressure Control Valve (I-Mark)
G37915Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals