LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1985 >> I-Mark 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System - NIPPONDENSO Electronic >> Overhaul >> Reassembly

Ignition System - NIPPONDENSO Electronic: Overhaul: Reassembly

  1. To assemble, reverse disassembly procedure. Attach weight to distributor shaft by aligning "10" mark with stopper. Lightly lubricate distributor shaft and washer.
  2. Select thrust washer that will give a housing-to-collar clearance of .006-.020" (.15-.50 mm). Stake collar roll pin into place. Check and adjust air gap.
scientia non olet · About LEMON Manuals