LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1984 >> Impulse Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator - HITACHI >> Overhaul >> Reassembly

Alternator - HITACHI: Overhaul: Reassembly

  1. Reinstall diode assembly and stator-to-rear cover. Solder stator coil lead wires-to-terminals of diode assembly, as quickly as possible. Reinstall diode cover.
    NOTE: Soldering must be done quickly to avoid damage to diodes.
  2. Assemble brushes to brush holder, with approximately .43" (11 mm) protruding. Insert holder into alternator. Reinstall rotor to front cover.
  3. Place assembly in vise and replace pulley and components. Tighten pulley nut to 29-43 ft. lbs. (39-59 N.m). Insert and tighten housing through bolts to 27-35 INCH lbs. (3-4 N.m).
scientia non olet · About LEMON Manuals