Wheel Alignment
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| I-Mark | |||||
| Caster (Degrees) | (1) +3 2/3 to 6 1/6 | ||||
| Camber (Degrees) | -1 to 2/3 | ||||
| Toe-in (Inches) | +5/32 to 5/64 | ||||
| Toe-Out on Turns (Degrees) | |||||
| Inner | N/A | ||||
| Outer | N/A | ||||
| Impulse | |||||
| Caster (Degrees) | (1) +3 1/2 to 6 | ||||
| Camber (Degrees) | (1) -1 to 1/2 | ||||
| Toe-in (Inches) | 0 to 1/8 | ||||
| Toe-Out on Turns (Degrees) | |||||
| Inner | N/A | ||||
| Outer | N/A | ||||
| P'UP | |||||
| Caster (Degrees) | +1/2 +/- 1/2 | ||||
| Camber (Degrees) | +1/2 +/- 1/2 | ||||
| Toe-in (Inches) | +5/64 +/- 5/64 | ||||
| Toe-Out on Turns (Degrees) | |||||
| Inner | N/A | ||||
| Outer | N/A | ||||
|
|||||