LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1983 >> Impulse Standard >> Repair and Diagnosis >> Engine Performance >> System >> I-TEC Control System >> Diagnosis & Testing >> Test 9: Detonation Sensor (Code 66)

Test 9: Detonation Sensor (Code 66)

  1. Disconnect terminals at MCU and at detonation sensor. Check circuits for shorts and grounds.
  2. The resistance across the detonation sensor terminals should be 650-800 ohms. Replace sensor if ohms reading is different.
scientia non olet · About LEMON Manuals