REAR FINAL DRIVE : Service Data

General Specifications

Applied model		2WD		4WD
		VK56VD
		A/T
Final drive model		R230
Gear ratio		2.937
Number of teeth (Drive gear/Drive pinion)		47/16
Oil capacity		Refer to MAINTENANCE : Recommended Fluid and Lubricants .
Number of pinion gears		2
Drive pinion adjustment spacer type		Collapsible

Unit: mm (in)

Companion Flange Runout

Item	Runout limit
Inner side of the companion flange	0.08 (0.0031) or less

Unit: mm (in)

Side Gear Clearance

Item	Specification
Side gear back clearance (Clearance limit between side gear and differential case for adjusting side gear backlash)	0.20 (0.0079) or less (Each gear should rotate smoothly without excessive resistance during differential motion.)

Unit: mm (in)

Back Lash

Item	Specification
Drive gear to drive pinion gear	0.13 - 0.18 (0.0051 - 0.0070)

Unit: mm (in)

Drive Gear Runout

Item	Runout limit
Drive gear back face	0.05 (0.0020) or less

Preload Torque

Item	Specification
Drive pinion bearing preload torque	1.76 - 2.65 N.m (0.18 - 0.27 kg-m, 16 - 23 in-lb)
Side bearing preload torque (reference value determined by drive gear bolt pulling force)	0.29 - 1.47 N.m (0.03 - 0.14 kg-m, 3 - 13 in-lb)
Total preload torque (Total preload torque = drive pinion bearing preload torque + Side bearing preload torque)	2.06 - 4.12 N.m (0.21 - 0.42 kg-m, 19 - 36 in-lb)