WHEEL ALIGNMENT : Service Data
| Item | Standard | |||
|---|---|---|---|---|
| Measurement wheel | Left side | Right side | ||
| Camber Degree minute (Decimal degree) |
Minimum | -0°45' (-0.75°) | -0°55' (-0.91°) | |
| Nominal | 0° 00' (0.00°) | -0°10' (-0.17°) | ||
| Maximum | 0° 45' (0.75°) | 0° 35' (0.58°) | ||
| -0°23'(-0.38°) ~ 0°43'(0.72°) | ||||
| Caster Degree minute (Decimal degree) |
Minimum | 2° 20' (2.34°) | 2° 40' (2.67°) | |
| Nominal | 3° 05' (3.08°) | 3° 25' (3.42°) | ||
| Maximum | 3° 50' (3.83°) | 4° 10' (4.16°) | ||
| -1° 05' (-1.08°) ~ 0° 25' (0.42°) | ||||
| Kingpin inclination Degree minute (Decimal degree) |
Minimum | - | - | |
| Nominal | 13° 20' (13.33°)*1 | 13° 25' (13.42°)*1 | ||
| Maximum | - | - | ||
| Toe-in | Total toe-in Distance |
Minimum | In 0.4 mm (In 0.016 in) | |
| Nominal | In 3.1 mm (In 0.122 in) | |||
| Maximum | In 7.2 mm (In 0.285 in) *3 | |||
| Total toe-angle Degree minute (Decimal degree) |
Minimum | In 0° 02' (In 0.04°) | ||
| Nominal | In 0° 13' (In 0.22°) | |||
| Maximum | In 0° 30' (In 0.50°) *3 | |||
Measure value under unladen *2 conditions.
*1: The minimum value and maximum value is the same as the nominal value.
*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
*3: Refer values for VIN number series (JN8AZ2NE5L9256486 from 17-03-2020), (JN8AZ2NF1L9705168 from17-03-2020), (JN8AZ2BC6M9475008 from 13-04-2020), (JN8AZ2BD9M9861009 from 10-04-2020).