Work Procedure

Always perform the ADAS control unit 2 configuration after replacing the ADAS control unit 2.

1. ADAS CONTROL UNIT CONFIGURATION 

   Perform the ADAS control unit 2 configuration with CONSULT. Refer to Work Procedure .

   >>

   GO TO 2.

2. PERFORM SELF-DIAGNOSIS 

   Perform the self-diagnosis of ADAS control unit 2 with CONSULT. Check if any DTC is detected.

   Is any DTC detected?

   YES>>

   Perform the trouble diagnosis for the detected DTC. Refer to DTC Index .

   NO>>

   INSPECTION END