Removal and Installation

REMOVAL 

1. Remove shift selector finisher. Refer to Exploded View .
2. Disconnect harness connector from push button ignition switch.
3. Remove screws (A), then remove push button ignition switch housing (2) from shift selector finisher (1).

   Courtesy of NISSAN NORTH AMERICA, INC.

4. Using a suitable tool, release pawls then remove push button ignition switch (1) from push button ignition switch housing (2).

   Courtesy of NISSAN NORTH AMERICA, INC.

   : Pawl

INSTALLATION 

Installation is in the reverse order of removal.