Work Procedure

CAUTION:

When performing the following operations, always use CONSULT : (It cannot be performed by any means other than CONSULT.)

Replacing ABS actuator and electric unit (control unit)

CHANGE OF SYSTEM MODE
1. CONSULT
  1. Select "ABS", "WORK SUPPORT", and "SYSTEM MODE CHANGE" according to this order.
    CAUTION:
    Never operate the parking brake switch.
  2. Select "START".
  3. Check display item "FACTORY MODE".
Is the inspection result "Off"?

YES>>

GO TO 2.

NO>>

Perform change of system mode again.
PERFORM THE SELF DIAGNOSTIC RESULT
1. CONSULT
  1. Pull parking brake switch to activate electric parking brake.
  2. Push parking brake switch to release electric parking brake.
  3. Select "Self Diagnostic Result" mode of "ABS".
Is malfunction detected?

YES>>

Check the DTC. Refer to DTC Index .

NO>>

Inspection End