Confirmation Procedure

If "Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

>>

GO TO 2.

With CONSULT

1. Start the engine.
   CAUTION:

   Never drive the vehicle.

2. Turn the steering wheel from full left stop to full right stop.
3. Return the steering wheel to the straight-ahead position.
4. Perform self-diagnosis for "DAST 1".

Is DTC "C13A1-00" detected?

YES>>

Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .

NO-1>>

To check malfunction symptom before repair: Refer to Inspection .

NO-2>>

Confirmation after repair: INSPECTION END